Measuring Instruments & Accessories

Product Details:

• Demagnetization is an important component of Electro-Magnetic Crack Testing. Residual Magnetism in test samples is an issue for many users and the Industry demands increasingly better demagnetization values.
• Where work pieces are subjected to a magnetic field due to a Magnetization Process – as part of a Testing Method, Processing, Or From Magnetic Lifting Equipment – a Residual Magnetic field will remain in the component after the field-generating source has been disabled (remanence), which must be neutralized. Eliminating this Magnetic Residue will help to avoid negative effects during later processing or when using the work pieces.

• The EECIFLUX coils are made of black Glass filled nylon. It is equipped with a Press to ON / Press to OFF foot switch and 3 Mtr long power cord and (400mm x 100mm) flat base, allowing the coil to stand in a vertical position.

Specification:

Product Details:

• Economical for use.
• Less effect on skin.
• Suitable for smooth & rough surfaces.
• Sensitive for hairline cracks.
• Excellent wetting characteristics.
• Available in small and convenient packing.

• Model: DP-B Black color magnetic powders for dry application. 1Kg.
• Model: DP-R Red color magnetic powders for dry application. 1Kg.

• Model: WP-B Water based wet application Black color magnetic powder 500 gms.
• Model: FP-W Water based wet application Fluorescent magnetic powder 500gms.

Oil Based Powders

• Model: OP-R oil Based wet application Red color magnetic powder 250g.
• Model: OP-B oil Based wet application Black color nagnetic powder 250 g.
• Model: FP-OS oil Based wet application Fluorescent powder for smooth surface 500 g.
• Model: FP-OC oil Based wet application Fluorescent powder for rough surface 500 g.

• Model: BTP BHEL test block for prod technique.
• Model: YTP Test Block for yoke technique.
• Model: ATP Test Blocks for yoke technique as per ASTM MTU-No3 test block as per ISO 9934.
• Pie Field Indicator as per ASTM E-709.
• Keto's test ring.

Product Details:

• Delivers over 5000W/cm2 @ distance of 15, with a beam spread of approximately 6
• Low Visible light Emission- less than 2 foot candle (20 LUX)
• Built-in fan keeps LEDs cool to maintain optimum light output during extended use
• Easy to switch between ultraviolet and white light
• Rubber made handle for easy grip
• Tough Aluminum Housing, Rugged, Modular Construction allows for easy field serviceability
• LED life 25000+ hours

Specification:

• UV Intensity : >5000uW/cm2 @ distance of 15" (38cm)
• Diameter UV coverage : 160mm (6.3 inch) @ distance of 38cm (15 inch)
• Wavelength peak : 365nm +/- 10%
• White light part of UVA : <20Lux

Product Details:

Product Details:

SENTINEL Source guide tubes are flexible stainless steel tubes with protective polyvinyl covering and are available to fit all projector units.

Intermediate and termination source guide tubes, which are interconnectable to provide required length, are available. The Intermediate section tube has a male connector at one end and a female connector at the other, and can be used with a disconnectable source stop as a guide tube termination.

The extreme condition source guide tube is designed for use in extreme weather conditions. It has a temperature range of -60 Deg C to 135 Deg C (-76F to 275F).

Product Details: