Radiation Monitoring Devices

Product Details:

Gamma monitor model DZM100/100R/100RE are microprocessor based instruments designed specifically for remote radiation monitoring. It's main function is to display radiation levels in the work area to caution radiation workers. It alerts the user with audiable/ visual alarms when preset radiation levels are exceeded. A battery backup provides up to 8 hours of additional use after the primary power is removed, is a very useful safely feature in areas expecting power failures. It is useful for Industrial Radiography, Nuclear Power Plants, Healthcare and Irradiation facilities.

Product Details:

• Detector: Shock-proof, halogen quenched GM tube. Internal (DZM100) External with 10m connecting cable for remote measurements (DZM100R / DZM100RE)
• Detected Radiation Type: Gamma(γ), X-Rays
• Energy Response: ± 30% 200KeV to 2 MeV (Ref Co-60)
• Minimum Radiation Detection:: 0.1 mR/hr OR 1 μSv/hr
• Maximum Radiation Detection: 999.9 mR/hr OR 9999 μSv/hr
• Dose Rate Linearity: ±15% (Ref Co-60)
• Display: Extra Bright 4 Digit Seven Segment LED Display
• Display Resolution: 0.01 mR/hr OR 0.1 μSv/hr
• Measurement Unit: Roentgen/ Sievert (User Selectable)
• Output Interface: Relay Output NO, NC and COM for Alarm condition
• Operating Temperature: -10° to 50° C

Alarm:

• User selected, non-volatile alarm value
• Visual (red and green lights) and Audio (siren)
• LED Indicator on External Probe

Product Details:

The Analogue Survey Meter is designed for radiation protection measurements. The integrated design represents a versatile, user friendly, hand held radiation measurement instrument. The ASM-10R is a truley wide range survey meter, suitable for nearly all measurement tasks arising in radiation protection.

Features:

• Measures Gamma & X-rays
• Separate(Dual) GM tubes for, low and high range
• Compact, Elegant & Light Weight
• Low Battery Life
• Ideal for NDT & Lab use
• Robust Construction
• Accuracy ± 10%

Specification:

• Sensor : Shock proof mounted dual halogen-quenched G.M. tube
• Display units : mR / hr and R / hr / uSv and mSv
• Controls : Six position rotary switch - OFF, Battery check, Range — 4 steps
• Range selections : 0-10 mR / hr / 0-100usv, 0-100mR / hr / 0-1mSv, O-IR / hr / 0-10 msv, 0-10 R / hr / 0-100 mSv.
• Calibration controls : Internal calibration potentiometers are provided for each range
• Anti-saturation : Built-in feature will not allow display pointer to full scale in highfield over 10 R / hr (100 msv)
• Display : Analogue meter — 1-10 main scale division with 5 sub divisions each
• Least count : 0.2 mR / hr (2 uSV)
• Accuracy : ± 10 %
• Battery check : Via meter pointer deflection in "battery check" mode
• Audio : Beeper chirps for each count (mute available)
• Power requirement : 1.5 V "AA" size 4 nos.
• Battery life : Upto 360 hrs. depending on radiation field levels.
• Temperature range : -100° c- 500° c

 

Additional Information:

• Item Code: ASM-10R

Product Details:

The Personal Radiation Monitor PM X is designed for professionals as well general use. It is reliable, accurate, light weight, rugged & easy to use. It can be used in field, Home & Office. It is ideal device for Radiographers, Radiogists, Radiological Technicians and Security Checkpoint Guards.

Features:

• Reliable
• Light Weight
• Audio Alert

Specification:

• Radiation Detection: Gamma(y), X-Ray
• Energy Detection Range : 50KeV to 1.3 MeV
• Audio : Beeper chips for each count
• Radiation alert : 1 bip/sec uGy/h (1mR/h)
• Power Requirement : 1.5 Volt AAA Size 1 no.
• Operating Temperature : -10° to 50°

Additional Information:

• Item Code: PM-X

Product Details:

The CM-10 is a rugged, versatile and accurate instrument designed to measure a wide range of radiation contamination. It is suitable for applications in the Nuclear, Foundry, Forging & Metal Industries. Its precise and sensitive measurements can also be used for contamination detection during Engineering purpose, Procedures, Laboratoty, Medical and Healthcares fields too.

Features:

• Detects Alpha, Beta & Gamma Radiation
• Sensitive pancake GM tube based detector for accurate measurements
• User selectable alarm threshold with audio & visual alarms
• High resolution graphic LCD for easy readability
• Comfortable, Sturdy & Lightweight handheld detector

Speification:

• Probe Configuration: The detector is in an external cylindrical aluminum housing, connected to the main unit via a 1m cable. A removable cover is provided for beta detection
• Radiation Detected: α, β, γ
• Measurement Units: CPS, CPM, mR/hr, μSv/hr

Measuring Ranges:

• 0 – 6000 CPS
• 0 – 360000 CPM
• 0.001 – 100 mR/hr
• 0.01 – 1000 μSv/hr
• Accuracy: ± 15% with Cs137
• Resolution : 1 CPS, 1 CPM, 0.001 mR/hr, 0.01 μSv/hr

Alarm:

• User selectable alarm threshold
• Beeping audio (with counts) when reading < threshold
• Continuous audio when reading > threshold
• Blinking Backlight when reading > threshold
• Keypad: Tactile switches with a sealed membrane
• Battery Life: > 60 hours
• Device Enclosure: Water resistant plastic enclosure
• Operating Temperature: 0° C to 50° C

Additional Information:

• Item Code: CM-10

Product Details:

Features:

• Light Weight & Compact to Fit in Pocket
• Easy to Read, Large LCD Display
• Loud, Audible Dose / Dose Rate Alarms
• Wide Measurement Range
• USB Connectivity & PC Software for reports

Specification:

• Detector : PIN detector for ionizing radiation
• Radiation Detected : y, X-rays
• Measurement Range : 0-2 sv or 200 R (Dose). 0-100 mSv/hr or 10 R/hr (Dose Rate)
• Energy Response : ± 25% Kev to 3 MeV
• Dose Accuracy : ± 15% (Ref Cs-137)
• Dose Rate Linearity : ± 15% (Ref Cs-137)
• Alarm : User selectable Dose Threshold . User selectable Dose Rate Threshold
• Overflow Indication : 'ORLD' indication on the LCD
• PC Software : Track dosimeter assignment to personnel Store cumulative dose over 5 years for each personnel Dose reports

Display:

Custom LCD to indicate:

• Dose
• Dose Rate
• Dose Alarm
• Dose Rate Alarm
• Battery %

Power Requirement : 1 no. Coin cell battery (Cr2032)
Operating Temperature : 0°C to 50°C

Product Details:

These models are digital handheld dose rate meter designed for a wide range of application involving detection & measurement of radiation levels. Its reliable performance & user friendly interface make the EECIRAD-5S & EECIRAD-5SD perfectly suited to radiation survey in field condition for protection against radiological hazards. The devices are microprocessor controlled & have a easy to use menu structure, displayed on the LCD.

The instruments are suitable for use in Industrial Radiography, Nucleonic Gauging, Health Physics, Radio Chemistry, Nuclear Installation, Nuclear Research Center, Nuclear Power Station, Defense, Police & Security Survey.

Features:

• Convenient, Rugged & Portable
• High Battery Life Time
• Visual & Audible alarms
• Large LCD Display
• Dose & Dose Rate Thresholds

Specification:

• Sensor : Shock proof mounted Halogen-quenched GM tube
• Radiation Detection : Gamma(y)
• Energy Detection Range : 50 KeV to 2 MeV
• Energy Response : ± 30% 600 KeV to 2 Mev (Ref Co-60)
• Dose Rate Linearity : ± 15% (Ref Co-60)
• Minimum Radiation Detection : 0.1 mR/hr or 1.0 uSv/hr
• Maximum Radiation Detection : 5R/hr or 50mSv/hr
• Display Refresh Rate : 1 to 5 seconds (varies as per dose rate intensity)
• Display Resolution : 0.1 mR or 1 uSV
• Data Logging : Dose Rate recorded every 60 sec. & Cumulative dose
• Measurement unit : Roentgen/ hr or Sievert/ hr (User Selectable)
• Alarms : User selected, non-volatile alarm value . Visual (LED) and Audio (Chirper)
• Operating Temperature: -10° to 50°

Additional Information:

• Item Code: EECIRAD-5S-5SD

Product Details:

DSM-5R is a compact, multi featured Dose & Dose Rate Survey Meter capable of measuring radiation dose & dose rate. It is designed for wide range of radiation safety applications and sucessfully used by radiation control service personnel. The PC interface enable recording data upto 1000 readings. It is suitable for use in Industrial Radiography, Nuclear Industry, Emergency Response, Health Care, Security Application.

Feature:

• Small, Rugged and Lightweight handheld design
• Dose & Dose Rate Measurements
• PC interface for Data Logging & Reporting
• Two programmable Audio and Visual Alarms
• Choice of Bar Scale or Numeric Value Display
• Large Display with Backlight

Specification:

• Radiation Detected : Gamma(), X-Ray
• Energy Response :  30% 200 KeV to 1.3 MeV (Ref Cs-137)
• Dose rate linearly :  15% for 200 Kev to 1.3 Mev
• Angular response :  30%,  120 degree for Cs-137
• Minimum Radiation Detection : 0.1mR/hr or 1 usv/hr
• Maximum Radiation Detection : 5 R/hr or 50mSv/hr
• Measurement unit : Roentgen/hr or Sievert/hr
• Display: High resolution graphic LCD with white back light
• Display Resolution : 0.1mR or 1mSv
• Alarm : User selected, non-volatile alarm values for both dose and dose rate; Visual (blinking backlight) and Audio (beeper)
• EECOWIN Software: Numerical and graphical view of recorded dose rates. View timestamp and values when dose or dose rate crosses the user selected thresholds
• Data Logging : Dose Rate recorded every 60 seconds; Threshold crossings are recorded
• Power Requirement: 4 nos AAA Size Alkaline Cells
• Operating Temperature : -10 to 50 C

Additional Information:

• Item Code: DSM-5R

Product Details:

The Radishield Radiation Protection System is a patented totally encapsulated shielding system. Its unique formulation gives flexible shielding in inaccessible and restricted applications where traditional methods of shielding are difficult to provide. Available in flat sheets of special sizes and guide tube shields of standard and custom lengths, Radishield provides the necessary protection for any NDT company.


Benefit:

• High flexibility
• Low on-site installation time
• Custom sizes available
• Lead free sheets available
• A hermetically sealed encased system allows for no sharp edges and no surface oxidation of lead
• Impermeable to water, dirt and other contaminates
• Easy to clean