Radiation Safety Devices

Product Details:

The CM-10 is a rugged, versatile and accurate instrument design to measure a wide range of radiation contamination. It is suitable for applications in the nuclear, foundry, forging & metal industries. Its precise and sensitive measurements can also be used for contamination detection during engineering purpose, procedures, laboratoty, medical and health cares fields too.

Features:

• Detects Alpha, Beta & Gamma radiation
• Sensitive pancake GM tube based detector for accurate measurements
• User selectable alarm threshold with audio & visual alarms
• High resolution graphic LCD for easy readability
• Comfortable, sturdy & lightweight handheld detector

Speification:

• Probe Configuration: The detector is in an external cylindrical aluminum housing, connected to the main unit via a 1m cable. A removable cover is provided for beta detection
• Radiation Detected: α, β, γ
• Measurement Units: CPS, CPM, mR/hr, μSv/hr

Measuring Ranges:

• 0 – 6000 CPS
• 0 – 360000 CPM
• 0.001 – 100 mR/hr
• 0.01 – 1000 μSv/hr
• Accuracy: ± 15% with Cs137
• Resolution : 1 CPS, 1 CPM, 0.001 mR/hr, 0.01 μSv/hr

Alarm:

• User selectable alarm threshold
• Beeping audio (with counts) when reading < threshold
• Continuous audio when reading > threshold
• Blinking Backlight when reading > threshold
• Keypad: Tactile switches with a sealed membrane
• Battery Life: > 60 hours
• Device Enclosure: Water resistant plastic enclosure
• Operating Temperature: 0° C to 50° C

Additional Information:

• Item Code: CM-10

Product Details:

The Analogue Survey Meter is designed for radiation protection measurements. The integrateddesign rpresents a versatile, user friendly, hand held radiation measurement intrument.The ASM-10R is a truley wide range survey meter, suitable for nearly all measurement tasks arising in radiation protection.

Features:

• Measures gamma & X-rays
• Separate(dual) GM tubes for, low and high range
• Compact, elegant & light weight
• Low battery life
• Ideal for NDT & lab use
• Robust contruction

Specification:

• Sensor : Shock proof mounted dual halogen-quenched G.M. tube
• Display units : mR / hr and R / hr / uSv and mSv
• Controls : Six position rotary switch - OFF, Battery check, Range — 4 steps
• Range selections : 0-10 mR / hr / 0-100usv, 0-100mR / hr / 0-1mSv, O-IR / hr / 0-10 msv, 0-10 R / hr / 0-100 mSv.
• Calibration controls : Internal calibration potentiometers are provided for each range
• Anti-saturation : Built-in feature will not allow display pointer to full scale in highfield over 10 R / hr (100 msv)
• Display : Analogue meter — 1-10 main scale division with 5 sub divisions each
• Least count : 0.2 mR / hr (2 uSV)
• Accuracy : ± 10 %
• Battery check : Via meter pointer deflection in "battery check" mode
• Audio : Beeper chirps for each count (mute available)
• Power requirement : 1.5 V "AA" size 4 nos.
• Battery life : Upto 360 hrs. depending on radiation field levels.
• Temperature range : -100° c- 500° c

 

Additional Information:

• Item Code: ASM-10R

Product Details:

Thess model are digital handheld dose rate meter designed for a wide range of application involving detection & measurement of radiation levels. Its reliable performance & user friendly interface make the EECIRAD-5S & EECIRAD-5SD perfectly suited to radiation survey in field condition for protection against radiological hazards. The devices are microprocessor controlled & have a easy to use menu structure, displayed on the LCD.

The instruments are suitable for use in industrial radiography, nucleonic gauging, health physics, radio chemistry, nuclear installation, nuclear research center, nuclear power station, defense, police % security survey.

Features:

• Convenient, Rugged & Portable
• High battery life time
• Visual & Audible alarms
• Large LCD display
• Dose & dose rate thresholds

Specification:

• Sensor : Shock proof mounted Halogen-quenched GM tube
• Radiation Detection : Gamma(y)
• Energy Detection Range : 50 Kev to 2 MeV
• Energy Response : ± 30% 600 Kev to 1.3 Mev (Ref Cs-137)
• Dose Rate Linearity : ± 15% for 200 Kev to 1.3 MeV
• Angular Response : ± 30%, ± 120 degree (Ref Cs-137)
• Minimum Radiation Detection : 0.1 mR/hr or 1.0 uSv/hr
• Maximum Radiation Detection : 5R/hr or 50mSv/hr
• Display Refresh Rate : 1 to 5 seconds (varies as per dose rate intensity)
• Display Resolution : 0.1 mR or I uSV
• Data Logging : Dose Rate recorded every 60 sec . Cumulative dose
• Measurement unit : Roentgen/ hr or Sievert/ hr (User Selectable)
• Alarms : User selected, non-volatile alarm value . Visual (LED) and Audio (Chirper)
• Operating Temperature: -10° to 50°

Additional Information:

• Item Code: EECIRAD-5S-5SD

Product Details:

The Personal Radiation Monitor PM X is designed for professionals as well general use. It is reliable, accurate, light weight, rugged & easy to use. It can be used in field, home & office. It is ideal device for radiographers, radiogists, radiological technicians and security checkpoint guards.

Features:

• Reliable
• Light Weight
• Audio Alert

Specification:

• Radiation Detection: Gamma(y), X-Ray
• Energy Detection Range : 50KeV to 1.3 MeV
• Audio : Beeper chips for each count
• Radiation alert : 1 bip/sec uGy/h (1mR/h)
• Power Requirement : 1.5 Volt AAA Size 1 no.
• Operating Temperature : -10° to 50°

Additional Information:

• Item Code: PM-X

Product Details:

DSM-5R is a compact, multi featured Dose & Dose Rate Survey Meter capable of measuring radiation dose & dose rate. It is designed for wide range of radiation safety applications and sucessfully used by radiation control service personnel. The PC interface enable recording data upto 1000 readings. It is suitable for use in industrial radiography, nuclear industry, emergency response, health care, security application.


Feature:

• Small rugged and light weight handheld design
• Dose & dose rate measurements
• PC interface for data logging & reporting
• Two programmable audio and visual alarms
• Choice of bar scale Or numeric value display
• Large display with backlight

 

Specification:

• Radiation Detected : Gamma(γ), X-Ray
• Energy Response : ± 30 0 Kev to 1.3 Mev (Ref Cs-137
• Dose rate linearly : ± 15% for 200 Kev to 1.3 Mev
• Angular response : ± 30%, ± 120 degree for Cs-137
• Mlnlmum Radlatlon Detection : 0.1mR/hr or usv/hr
• Maximum Radlatlon Detection : 5 R/hr or 50mSv/hr
• Measurement unit : Roentgen/hr or Sievert/hr
• Display : High resolution graphic LCD with white back light
• Display Resolution : 0.1mR or 1mSv
• Alarm : User selected, non-volatile alarm values for both dose and dose rate . Visua (blinking backlight) and Audio (beeper)
• EECOWIN software : Numerical and graphical view of recorded dose rates . View timestamp and values when dose or dose rate crosses the user selected thresholds
• Data Logging : Dose Rate recorded every 60 seconds . Threshold crossings are recorded
• Power Requirement : 4os AAA Size Alkaline Cells
• Operating Temperature : -10° to 50° C

Additional Information:

• Item Code: DSM-5R

Product Details:

Gamma monitor model DZM100/100R/100RE are microprocessor based instruments designed specifically for remote radiation monitoring. It's main function is to display radiation levels in the work area to caution radiation workers. It alerts the user with audiable/ visual alarms when preset radiation levels are exceeded. A bettert backup provides up to 8 hours of additional use after the primary power is removed, is a very useful safely feature in areas expecting power failures. It is useful for industrial radiography, nuclear power plants, healthcare and Irradiation facilities.

Product Details:

• Detector: External, shock-proof, halogen quenched GM tube, with 10m connecting cable for remote measurements
• Detected Radiation Type: Gamma(γ), X-Rays
• Energy Response: ± 30% 200KeV to 2 MeV (Ref Cs-137)
• Angular Response: ± 30%, ± 120 degree (Ref Cs-137)
• Minimum Radiation Detection:: 0.1 mR/hr OR 1 μSv/hr
• Maximum Radiation Detection: 999.9 mR/hr OR 9999 μSv/hr
• Dose Rate Linearity: ±15% for 200 Kev to 1.3 MeV
• Display Extra Bright 4 Digit Seven Segment LED Display
• Display: Resolution 0.01 mR/hr OR 0.1 μSv/hr
• Measurement Unit: Roentgen/ Sievert (User Selectable)
• Output Interface: Relay Output NO, NC and COM for Alarm condition
• Operating Temperature: 0° to 50° C

Alarm:

• User selected, non-volatile alarm value
• Visual (red and green lights) and Audio (siren)

Additional Information:

• Item Code: DZM-100RE

Product Details:

Features:

• Light Weight & Compact to Fit in Pocket
• Easy to Read, Large LCD Display
• Loud, Audible Dose / Dose Rate Alarms
• Wide Measurement Range
• USB Connectivity & PC Software for reports

Specification:

• Detector : PIN detector for ionizing radiation
• Radiation Detected : y, X-rays
• Measurement Range : O- 2 sv or 200 R (Dose) . O - 100 mSv/hr or 10 R/hr (Dose Rate)
• Energy Response : ± 25% Kev to 3 MeV
• Dose Accuracy : ± 15% (Ref cs-137)
• Dose Rate Linearity : ± 15% (Ref cs-137)
• Alarm : User selectable Dose Threshold . User selectable Dose Rate Threshold
• Overflow Indication : 'ORLD' indication on the LCD
• PC Software : Track dosimeter assignment to personnel Store cumulative dose over 5 years for each personnel Dose reports

Display:

Custom LCD to indicate:

• Dose
• Dose Rate
• Dose Alarm
• Dose Rate Alarm
• Battery %
• Power Requirement : 1 no. Coin cell battery (Cr2032)
• Operating Temperature : O°C to 50°C

Product Details:

Qualities

• DS-5XX is a Multi-Channel Digital Ultrasonic Flaw Detector
• It uses latest in Micro-Component technology to give features and performance not found to its class of equipment.

• It’s channels are independently adjustable for Gain, Range, Gate and other parameters.

• Each Channel has alarm LED which are prominently placed for operator visibility.

 

Specification:

• Receiver bandwidth : 0.5 to 15MHz by broad band amplifier.
• Gain : 0-80dB, 0.1,0.5.1,2,6, 12dB selectable
• Rejection : Linear type (0- 99%) of full screen ,Height, 1% step Rejection will be ,displayed in single channel mode. In run all mode it will not be visible.
• Operating mode : T-R, T+R by external connection.
• Test mode : Pulse reflection or pulse Transmission
• Echo display : Full wave rectified
• Vertical linearity : 5.00%
• Range : 10mm min. - 725mm. Max (@5890M/sec) -Continuous variable
• Delay : 0-1000mm continuous variable
• PRF : In built . Auto limiting for set parameters
• Velocity : Velocity 2000m/s to 9999m/s
• Time base linearity : 1% (±0.5%)
• Triggering : Internal
• Monitor Gates
• 2 Gates for all channels ,
• Width 1/10 screen to full screen;
• Height 1/10 screen to 99% ;
• Gate start measured from initial Pulse
• Monitor Logic : +/- Logic selectable

Alarm

• Audio/visual (Audio mute)
• Each channel will have RED LED
• for gatel function and GREEN LED
• for gate2 function
• Trigonometric : Beam path, Flaw depth & Projection Distance
• Functions TRIG (Job thickness) : 0.1 to 300mm

Measurements

• Echo height- ± 1.0% tolerance
• Thickness (Echo to Echo) -
• + 0.1mm or + set range/300 which
• ever more with peak & flank option.
• Parameter Display : Permanent display -Horizontal & vertical graticule. Common display for all channels-Lock, Battery status, zoom, Freeze, Active freeze. Display for individual Channels---Gain, Beampath, Flawdepth/Thickness, Projection Distance, Envelop, Probe zero, Delay, Range, Reject, Gatel/Gate2 ON/OFF, Gate shift, Gate Width, Gate height, alarm mute, Configuration menu, Memory save, Memory recall.
• Display Scheme : Any one channel on one A scan trace or four A scan traces with two channels each are displayed. Current display freeze & Active freeze, Accumulated display
• Display Pattern : Filled / Unfilled
• Reference pattern Display : Reference pattern can be displayed at the Background from selected location in Memory

• Graticules : 5div(H) X 5div(V), further sub divided into 10 small divisions
• Battery Indicator : Battery status indicator with auto shut Down
• Memory : 200 multicolored 'A' scans memory , with calibration parameters and trigonometric values , 15 calibration sets.
• Interface : PC & pen drive connectivity via USB

Trace Color :Selectable white and black background;

• CH-1 ---WHITE;, CH- 2--GREEN;
• CH-3—-ORANGE; CH4---LlGHT BLUE;
• CH-5-PINK; CH6---YELLOW;
• CH-7m-BLUE; CH-8-mOTHER COLOR
• PC software : EECOWIN PC interface software Can upload saved "FRAME" set to PC through USB
• Accessories : Li-ion Battery pack. External Battery charger cum mains Adaptor Input 90-240V AC, 50-60Hz. Protective case. Instruction manual.

 

Additional Information:

• Item Code: DS-5XX

Product Details:

We are leading Manufacturer of 989 Baby Scar Projector and our product is made up of good quality.

Features

• Uses 75Selenium™ (20 Ci Max)
• Directional Beam Device
• Small and Lightweight
• Tungsten and Lead Shielding
• Hand crank or pneumatic actuator operation.

Specification:

• Primary application: Directional beam industrial gamma radiography
• Model number: Model 989 radiographic exposure device
• Shielding: 5.7 pounds (2.6 kg) of tungsten plus 3.8 to 5.4 pounds (1.7 to 2.5 kg) of lead or tungsten for the collimator
• Construction: Tungsten shielding is encased in a welded tubular stainless steel shell. The collimator shielding contains lead or tungsten metal to shape the emergent primary beam when the source assembly is in the exposure position. The shell is partially sealed to prevent the ingress of mud, sand. moisture and liquids during use. The exposure device should not be submerged in liquids during use
• Device Mounting Provision: Manufactured with six 1/4-20 UNC thread mounting holes, 1/2” deep, which permits secure attachment to positioning-fixtures.
• Maximum capacities of the Model 989
• Exposure device: 20.0 Curies (740 GBq) of Selenium-75 as special form
• Source assembly model number: Sentinel™ Model 97941
• Sealed source capsule: Designed for Sentinel™ Model X540/1 only

Sealed source and exposure device

• certifications: Special form: USA/0502/S-96 The exposure device contained in the transport package meets the requirements for a Type A transport packages under IAEA TS-R-1 (1996), USNRC 10CFR71, USDOT 49CFR173, and was designed to meet the applicable specifications of ISO 3999:2004(E) for Category X exposure devices.
• Inspection requirements: A daily inspection of the device for obvious defects is required. Complete annual servicing and/or collimator replacement can only be performed at Sentinel™ or at one of its authorized service centres.
• Operating temperature range: -40 degrees F to 300 degrees F (-40 C to 149 degrees C)
• Sentinel ™Model 989 actuators for radiographic exposures: The Model 989 exposure device is compatible for use with Sentinel manufactured crank-out remote controls or air pressure actuators (part number ELE 027). For designed radiological safety, the only crank-out remote controls and air pressure actuators that can be used with the exposure device must be authorized by Sentinel™.

Product Details:

The Radishield Radiation Protection System is a patented totally encapsulated shielding system. Its unique formulation gives flexible shielding in inaccessible and restricted applications where traditional methods of shielding are difficult to provide. Available in flat sheets of special sizes and guide tube shields of standard and custom lengths, Radishield provides the necessary protection for any NDT company.


Benefit:

• High flexibility
• Low on-site installation time
• Custom sizes available
• Lead free sheets available
• A hermetically sealed encased system allows for no sharp edges and no surface oxidation of lead
• Impermeable to water, dirt and other contaminates
• Easy to clean